| Proj. Onto Plane Def. By
|
Controls the plane against which the element is
projected:
-
Shape – Defines a projection plane by a
shape.
-
3 pts – Defines an imaginary plane by
three points.
-
2 pts/view – Defines a projection plane
through two points and perpendicular to the view of the first point.
|
| Tolerance
|
Sets the smoothness of the curve.
Tolerance is the maximum deviation between
the actual curve and the approximating line segments for the arc and curved
elements. As you decrease the value in the tolerance field, the curve becomes
smoother.
|
| Add Dropped Element
|
When on, adds an additional line to each edge of
the projected element.
|
Used to project a copy of
an element against a shape or plane and then to delete the original element.
